HCHCR Steel

Product Details:

AISI D2 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadium. AISI D2 is characterized by High wear resistance. High compressive strength. Good through-hardening properties.

Typical application of HCHCR D2, D2 steel is used to manufacture Stamping or forming
dies, punches, forming rolls, knives, slitters, shear blades, Tools & other precision components.

We are stockist of D2 Steel Round Bar, dealers of D2 Steel Round Bar, Manufacturers of D2 steel, HCHCR D2 steel,  D2 Steel Suppliers, D2 Stockist, D2 Steel Dealers, D2 Steel Distributors, D2 Wholesalers, D2 Steel Traders, D2 Steel Square Distributors, D2 Steel Flat Bar, D2 forged bar, D2 steel plate, D2 forged flat bar.

Product Details:

D3 steel is an air hardening, high-carbon high-chromium tool steel. It displays excellent abrasion/wear resistance and has good dimensional stability and high compressive strength.

Applications for D3 Steel are Blanking and forming dies, Forming rolls, Press tools, Punches, Bushes and precision components.

We are dealers and suppliers of D3 hchcr round bars. D3 steel manufacturers, D3 steel stockist, D3 hchcr steel, D3 forged bars.

Product Details:

High-carbon high-chromium steel D2, D3 are commonly used for making cutting tools. It possesses higher abrasion resistance and higher degree of dimensional stability in heat treatment. It is high resistant to softening and medium resistant to decarburizing and can be nitrided.

Product Details:

Free cutting steels are steels with carbon ratio ranging from 0.07% to 0.60%, sulphur ratio from 0.15% to 0.40%, and phosphorus ratio from 0.07% to 0.10%. Even though we try to decrease sulphur and phosphorus in ratio for all other grades, they are specifically added to free cutting steels since they increase machining capability. These added elements create a metallic fragility in the material and enable short fragile chips. Also, addition of sulphur and phosphorus creates a lubrication effect and increases part strength, allowing to obtain clean surfaces.

Product Details:

D2 steel is an air-hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion-resistant properties. It is heat treatable and will offer a hardness in the range of 55-62 HRC, and is machinable in the annealed condition.

D2 steels are used for long-run tooling applications, where wear resistance is important, such as blanking or forming dies and thread rolling dies.

Product Details:

D3 steel is an air-hardening, high-carbon, high-chromium tool steel. It displays excellent abrasion/wear resistance and has good dimensional stability and high compressive strength.

 

D3 Steel has properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools. 

Typical applications for D3 Steel are:

• Blanking and forming dies

• Forming rolls

• Press tools

• Punches

• Bushes

Product Details:

MS ERW (Mild Steel Electric Resistance Welded) square pipes are a type of steel pipes that have a square cross-section. These pipes are commonly used in various industrial, construction, and infrastructure applications. Here's some information about MS ERW square pipes:

Definition: MS ERW square pipes are manufactured using the process of electric resistance welding, where the edges of the steel strip are heated and fused together under pressure to form a continuous square pipe. This welding technique ensures a strong and durable bond, providing structural integrity and reliability to the pipes.

Dimensions: MS ERW square pipes come in a variety of dimensions, including:

• Length: The length of the pipes can vary based on the specific requirements and project needs. Standard lengths typically range from 6 meters to 12 meters, although custom lengths may be available.
• Width: The width of MS ERW square pipes can vary, typically ranging from a few inches to several inches.
• Wall Thickness: MS ERW square pipes are available in different wall thicknesses, which can vary based on the application and structural requirements. The wall thickness determines the strength and load-bearing capacity of the pipes.

Grades: MS ERW square pipes are typically made from mild steel, which is a low carbon steel. The specific grade of mild steel used in the pipes may vary depending on the requirements and industry standards. Commonly used grades for MS ERW square pipes include IS:1239 and ASTM A53.

IS:1239 (Indian Standard) is widely used for MS pipes in India, including square pipes. ASTM A53 (American Standard) is another commonly used grade for MS pipes in the United States and other regions.

It's important to consult with reputable manufacturers or suppliers to ensure that the MS ERW square pipes you select meet the required dimensions, wall thickness, and grade specifications for your specific project.

MS ERW square pipes offer excellent structural strength, durability, and versatility, making them suitable for a wide range of applications such as construction, infrastructure, fabrication, furniture, automotive, and more.

When sourcing MS ERW square pipes, ensure you work with trusted suppliers who provide high-quality products that meet industry standards and offer the required dimensions, wall thickness, and grade specifications for your specific project needs.

Product Details:

Bearing steel is a high-quality steel that is specifically designed for use in bearings and other high-load applications. It is known for its excellent wear resistance, fatigue strength and toughness. There are different grades of bearing steel, each with specific properties and characteristics that make them suitable for different applications.

There are several grades of bearing steel, each with specific properties and characteristics that make them suitable for different applications. Some of the common grades of bearing steel include:

• SAE 52100: This is a high-carbon, high-chromium alloy steel that is known for its excellent wear resistance and hardness. It is commonly used in the production of bearings for automotive and industrial applications.

• SAE 9310: This is a high-carbon, low-alloy steel that is known for its excellent strength and toughness. It is commonly used in the production of bearings for aerospace and defense applications.

•  

• SAE 8620: This is a low-alloy, nickel-chromium-molybdenum steel that is known for its good hardenability and toughness. It is commonly used in the production of bearings for heavy-duty machinery and equipment.

•  

• SAE 440C: This is a high-chromium stainless steel that is known for its excellent corrosion resistance and wear resistance. It is commonly used in the production of bearings for food processing and medical equipment.