Carbon Steel

Product Details:

EN8D grade steel is a medium carbon steel offering moderate tensile strengths. EN8D is commonly supplied in hot rolled condition or in form of bright bars. It's an engineering steel that offers greater strength and hardness as compared to the low carbon grades.

We are a leading supplier of EN8D round bars, EN8D RINL bars, EN8D VSP bars. 

Product Details:

CLIV Carbon steel have carbon ranging from 0.40 - 0.50% and acts as the key alloying element in their composition. They also contain up to 0.4% silicon and 1.2% manganese. In addition, residual elements such as copper, molybdenum, aluminum, chromium, and nickel are present in these steels.

We produce carbon flats, cabon patti, CL-4 flat bar, EN8 flat bar, C45 flat bar, 45C8 flat bar. 

Product Details:

EN8 is a medium carbon steel which is used in applications where better properties than mild steel are required, at a lower cost than an alloy, making this an excellent alternative to alloy.

It has reasonable tensile strength. By heat treating this engineering steel provides a good surface hardness. 

EN8 square bars are used for EOT cranes and other enginnering items. 

We also produce EN8 square bars from prime tested billets for better surface and controlled chemical.

Product Details:

AISI 1045 is defined as medium carbon steel which has 0.43%-0.5% Carbon.It offers good weldability, good machinability, high strength and impact properties,but low in hardenability because of lack of suitable alloying elements,but it can obtain surface hardnesses 54-60HRC after flame or induction hardening.

AISI 1045 round bar dealer, CK45 round bar supplier, C45 round bar stockist. We deal in medium carbon steel round bar, prime make SAE 1045 round bars.

Product Details:

C40 Carbon Steel is a common medium carbon and medium tensile steel, with improved strength over mild steel, through-hardening medium carbon steel. C40 Carbon Steel Round Bar is also readily machinable in any condition. C40 steels are generally used in the as supplied untreated condition.

Product Details:

C45 Bright Bars are cold drawn/ground/peeled plain bars produced from hot rolled plain carbon steel bars/wire rods. These cold drawn bars have a smooth and a bright surface with accurate tolerance on the dimensions, they possess improved mechanical properties, greater dimensional accuracy, better surface integrity and higher machinability.

We are a leading manufacturers and supplier of C45 bright bars, C45 polished bars, C45 cold drawn bars, 45C8 bright bars, C45 VSP bright bars, RINL bright bars.

Product Details:

We offer wide sizes and quality of C45 round bars. C45 is a medium strength steel with good machinability and excellent tensile properties. It's generally supplied in hot rolled condition, black bars. C45 round bar available from both Local and prime make. 

We are a leading supplier of C45 round bars, C45 carbon steel, C45 bright bars, C45 steel, EN8 steel dealer, C45 steel kolkata, C45 steel howrah. 

Product Details:

ST 52.3 round bar is a great tensile carbon steel with higher power than both 1018 and C045. ST 52.3 round bars are carbon-manganese grade which are functioned to produce high ductile properties and habitually used in the motorized industry. We are supplier of ST52.3 round bars.

Product Details:

Carbon steel forgings are designed and shaped by means of a steel forging process. This type of steel forging comprises an low amount of alloy. 

Product Details:

EN8 Carbon Steel Flat Bar is a versatile and widely used product known for its excellent strength, durability, and machinability. It is commonly used in various industrial applications that require a reliable and sturdy material. This flat bar is made from EN8 carbon steel, which is a medium carbon steel known for its balanced combination of strength and toughness.

Sizes and Dimensions: Our EN8 Carbon Steel Flat Bar is available in a range of sizes and dimensions to meet your specific requirements. Common sizes include:

• Width: From 20mm to 300mm
• Thickness: From 3mm to 100mm

Kindly share your requirements for EN8 Patti, EN8 Patta, CL-4 Patti, EN8 Flat, EN8 Strip, Carbon Steel Flat Bar, 45C8 Strip, C45 Flat Bar, 45C8 Flat Bar.

Product Details:

EN8 plate and C45 plate are both medium carbon steel plates that are commonly used in the manufacturing of gears, shafts, and heavy-duty machinery components.

EN8 plate, also known as 080M40, has a high tensile strength of 810 N/mm2 and a good machinability. C45 plate, also known as 1045, has a higher carbon content of 0.45% and a higher tensile strength of 630 N/mm2.

The sizes of EN8 plate and C45 plate vary depending on the manufacturer and supplier. They are typically available in standard sizes such as 2000mm x 1000mm and 2500mm x 1250mm, but can also be customized to meet specific requirements.

Some popular brands that manufacture EN8 plate and C45 plate include Tata Steel, JSW, Mukand, and Sail.

Both EN8 plate and C45 plate are widely used in various industries such as construction, engineering, and machinery manufacturing. EN8 plate is known for its durability and resistance to wear and tear, making it a popular choice in high-stress applications. C45 plate is commonly used in the manufacturing of gears, shafts, and machinery parts, as well as in the construction of structures such as bridges and buildings.

Overall, both EN8 plate and C45 plate are strong, reliable materials that are suitable for a wide range of applications, although C45 plate is more suitable for gears, shafts and machine parts where high tensile strength and hardness are required, while EN8 is more suitable for high stress applications.

We are stockist and dealer of EN8 plate, EN8 Sheet & C45 plates in India.

Product Details:

EN8/ CLIV Carbon steels have carbon as the key alloying element in their composition. They also contain up to 0.4% silicon and 1.2% manganese. In addition, residual elements such as copper, molybdenum, aluminum, chromium, and nickel are present in these steels.

Product Details:

Introducing our top-quality carbon steel EN8/C45 sheets and plates, sourced directly from renowned primary manufacturers like Evonith Steel (Lloyds), Jindal Steel & Power Ltd, AMNS, TATA, and others. These sheets and plates are meticulously crafted to meet industry standards, ensuring exceptional strength, durability, and reliability. Available in thicknesses ranging from 4mm to 50mm, with widths of 1500mm, 2000mm, and 2500mm, and lengths of 6 and 12 meters, our C45 plates cater to a wide range of industrial applications. Whether you require standard sizes or custom dimensions, we provide cut-to-size materials to meet your needs. We offer nationwide delivery across India, ensuring prompt and efficient service. For any inquiries or to place an order, contact us today and experience the quality and convenience we offer.

Product Details:

Discover our high-quality carbon steel round bars, available in grades SAE 1045 and SAE 1046, sourced directly from premier manufacturers such as TATA, SAIL, BHUSHAN, and others. These round bars are crafted to meet stringent quality standards, ensuring exceptional performance and reliability in a variety of applications. Ranging from 90mm in diameter to 250mm in diameter, our round bars cater to a diverse range of industrial needs.
Our materials undergo rigorous ultrasonic condition testing, guaranteeing their integrity and quality. Each shipment is accompanied by a comprehensive Test Certificate, assuring compliance with industry standards. As a leading supplier of carbon steel round bars in East India, we are committed to delivering excellence in both product quality and service.
Contact us today with your requirements, and let us fulfill your carbon steel needs with efficiency and expertise!